Motorcycle shoes

Hello, I have recently purchased linings for jaws for rometa ogara 200.I highly recommend this product very well fitted and most importantly it is aesthetically made.The product from this website is very quickly delivered by our brave couriers.When I bought the same product only from allegro the jaws were not as required as those from Gmoto.pl. sorry for the quality of the photos but I have a poor camera in my phone

The product is really recommendable . Made on the model of the orginal and does not differ significantly . The facings are well glued .

Mz250etz almost everything fits were too tight but a little grinding and ok śmigajo like orginał.Order express

Hello I am the owner of a motorcycle brand Kingway Tanco. It is a ripping and very good scooter with a capacity of 50 cc. Recently, unfortunately, my old brushes have worn out and I was missing the rear brake, which is an important part of any one-scooter. As I always make purchases related to my scooter at gmoto, this time I could not do otherwise. So I ordered a set of jaws for my 4t at a very bargain price. The jaws arrived within 48 hours of placing the order. Everything was beautifully and nicely packed everything that should be in the package was that is the puppies,and the receipt and the card for possible return. As for the puppies themselves, the quality of workmanship is world class wszysrko meticulously made. The quality of materials used to make these parts is really top shelf. The jaws looked really great and I immediately had to replace them because I could not wait to see how they worked. The replacement went very easily, the jaws fit perfectly and the end result is really surprising. I have owned my motorcycle for 7 years now, but it has never really braked the rear brake thanks to the replacement of worn bristles. I am very pleased with this purchase and can confidently recommend it to anyone who sees that the rear brake does not meet his expectations after replacement will be everyone 100% satisfied. Thank you for your attention, greetings and invite you to purchase both parts which are brushes and to purchase other parts and motorcycle accessories at gmoto because it is the best motorcycle store available on the Internet.

I have a moped brand zipp Salmo HMN50Q-M at the beginning was inserted 49cm3 engine , I bought 110cm3 completely complete (139FMB) . I ride the 3rd year and it works perfectly . I have done 41334km with it. I recommend such a moped to everyone, low operating costs, low fuel consumption of 2.5-3l = 100km . The only thing you need to change is oil, as everywhere else, pour fuel and ride at will. A week ago I ordered just these Brake Jaws, they fit perfectly to Zippk'a thick lining works great I hope it will serve for many years. I recommend to everyone with hand on heart !

The facings are a bit too short for the Gazelle, but you can fix them by drilling holes 0.5cm closer. It is advisable to order more, because they are quite fragile and during riveting they like to break. The information that they can be glued with butaprene is irresponsible! Butaprene is not suitable for gluing brake linings because it can not withstand such temperatures, there is a special glue for gluing brake linings.

Brake shoes too wide, the wheel cannot rotate! Probably made for a very used brake drum... Brake shoes too wide, the wheel cannot rotate! Probably made for a very used brake drum... Brake shoes too wide, the wheel cannot rotate! Probably made for a very used brake drum... Brake shoes too wide, the wheel cannot rotate! Probably made for a very used brake drum...

Yes, you had to stop the scooter and put the front down if you wanted to go around. When I didn't know how to bowl, it went around. Nowadays a one-piece block is a two-piece block. Went around and then we were in the ditch. Yes, the brake shoes made the car stop and quickly bow down, but the driver's skill was gone.

Caeset 350 vintage 1983 brake shoes fit the rear wheel. The build quality of the product is very good. The installation took place without any problems. The product is worth recommending. Ps. What about the quality of the abrasive linings, visually, flawless. Durability- I will find out only during use.

The jaws tested over 9,000 kilometers performed without complaint. Only at the end of the test it was possible to feel less braking power. I recommend. More about replacement equipment for long-distance travel at: http://125cmmieszanychuczuc.blogspot.com/.

The facings are of good dimensions. They are neither too long nor too short, nor too thin. They do not differ from the original. Alternative for missing complete jaws. Romet Ogar 200 50cm3. You have to be careful they break easily even with gentle drilling.

The jaws look very good, they fit the etz 250 drum perfectly, I highly recommend the walker to a bit I miss in the set of springs and protective rings it would be nice from the manufacturer if he would expand his offer with these parts

I own a Barton Atomic scooter (engine 139QMB), the jaws fit quite well, the lining is thick enough to ride on it a lot. The brakes, when tightened, perform well, they do not squeal or make other noises. I recommend to others

Jaws very solidly made. I bought them 3 times already and each time they were solidly made. I have been riding on them for about a year and the wear rate is very low because they are made of cork which is slowly wearing out. I highly recommend

When at gmoto you buy good quality you gain,a fully fitted product for your motorcycle recommended.The aesthetics are exemplary and it looks like a supernova.So sister brother stock up on parts here because this store is the best!!!!

Simson S51. The jaws too large for the original drum on the simson, it was necessary to grind the top of the lining. After the modification, everything works as it should, and the jaws themselves are made of good materials.

I bought brake pads for my Caeseta 350 from Gmoto store. The goods are without defects and of very good quality. It is no different from the original linings. I would recommend to anyone who is refurbishing their Jawa or Cezet 350.

Pads at a very good price, the quality of the material looks great, I have already purchased such a set in the past and was also very satisfied. I fit perfectly, choosing the model of the vehicle everything you find fits for sure.

Good day I own a WSK 125 M06 B3. I was thinking about a restoration for a long time due to the lack of a lot of parts. The part purchased from you fits perfectly. At last Wsk brakes as it should! I recommend the product.

good quality brushes, thick liner the product works perfectly for the price of the product it is worth buying such brushes if you have the dimension 105 by 105 by 25 hitch hole fi 8 and that should also be remembered